china professionalPVC flooringmanufacturer

Home / All / Vinyl Flooring Industry /

How to Install your Vinyl Flooring

How to Install your Vinyl Flooring

Feb 25,2016

Step 1: Prepare your subfloor


To ensure a smooth installation, it is important to prepare the surface onto which you’ll be laying your floor. Vinyl can also be laid onto an existing floor

Thing is to have a dry, even and clean subfloor. If the floor is uneven (tile joints, parquet bevels or any type of cracks), think about using a leveling compound. Remember, vinyl is a soft flooring and any bumps underneath will show.

Clean the subfloor thoroughly using a neutral cleaning product to clear away any dirt or dust and make sure it is fully dry before you start. If the surface is very smooth, a primer might be necessary to help the flooring adhere to the subfloor.




Step 2: Prepare your flooring


It is important for the flooring to acclimatise for at least 24 hours before installation at a minimum room temperature of 15°C. Unroll the flooring and cut it to size allowing an extra 15-20cm to avoid being short of material at the end of the installation.




Step 3: Install your flooring


As a general rule, flooring is installed following the direction of the main light source. However if the room is narrow, like a corridor, the sheets should run along the length of the room, regardless of the light direction.

Apart from wood designs, all consecutive sheets should be installed in the opposite direction for a homogeneous rendering. You’ll find this indicated within the product description.



If you want to learn more about our company and products ,welcome to visit  on
www.hanflor.com and contact us info@hanhent.com

Let's get in touch

Subscribe us here
subscription